Sep 172012
 
Show Us Your Stuff Followup: Travis Smith
Print Friendly, PDF & Email

Travis Smith’s impressive carving, ‘Tu es le vent dans mes voiles’ was featured in the woodcarving column of the October, 2011 issue of Wood News. He has since updated us that the carving won First Place in the Fine Arts division at the National Fair! Travis says the carving is now in the fourth floor […]

Sep 142012
 
Book Review: Traditional Box Projects
Print Friendly, PDF & Email

In the September issue of Wood News Online, J. Norman Reid reviews the book Traditional Box Projects by Strother Purdy. Here’s what he had to say: Recently, Strother Purdy’s fine book, Traditional Box Projects, arrived in my mailbox. As is my custom, I immediately flipped through its pages to see what would catch my eye. […]

Sep 132012
 
Morton's Shop: Joint the Edges
Print Friendly, PDF & Email

I like to use my Lie-Nielsen #7 to clean up the edges of boards I’m about to edge-join.  This makes the edges square, clean and also allows me to make a sprung joint.  That’s a joint where the boards touch at the ends, but are slightly apart in the center – making a nice tight […]

Sep 122012
 
A Router Jig and A Little Extra Focus
Print Friendly, PDF & Email

I’m working on a Les Paul style electric guitar build. Many guitars have tops that are somewhat flat, but in contrast, most Les Paul guitars have curves and angles that make them fairly sexy. One of these angles is on the front portion of the top, and I cut it with a router and special home-made jig. This approximately 5 degree angle […]

Sep 112012
 
Morton's Shop: Flatten the Top
Print Friendly, PDF & Email

The two top boards are almost 2″ wide, which is much bigger than my machinery.  So, I pulled out a few hand tools and got to work.  I used an old #6 Stanley hand plane with a very camabered blade, a new Lie-Nielsen #7 and even a belt sander. I”d mostly use the Stanley #6 across the […]

Sep 072012
 
Take a look at the September 2012 Wood News Online!
Print Friendly, PDF & Email

The September issue of Wood News Online is available now! With summer winding down, we are all getting back into our shops a bit more – take a look at this month’s Wood News for a little woodworking inspiration. And speaking of, we’ve got some inspired woodworking by Rod Scott in our Show Us Your Stuff column, […]

Sep 062012
 
Morton's Shop: Underside Support
Print Friendly, PDF & Email

The rest of the underside support needs cutting out, drilling holes and finishing. I applied a black finish on these support pieces prior to attaching them to the top.  I put on one coat of TransTint black diluted in water and then one coat of shellac mixed with Mars Black Pigment. Morton is a furniture designer […]