Nov 162009
 
Print Friendly, PDF & Email

Have you tried the new Sharpening Service that Highland Woodworking now offers? Maybe you didn’t know there was such a service available, but there certainly is. I thought I would give it a try and let you know how it works.

I had one very dull twelve inch sixty tooth carbide tipped saw blade, and five each half inch carbide patternmaker router bits, the ones with the bearing on the bottom. And no, they did not know it was me giving them a test for the blog, as if that would have made a difference. It was a Wednesday afternoon when I took the whole package to my local retail shipping outlet and asked them to pack the stuff up for me and ship it to the service in New Jersey. I live in Atlanta so they checked all three shipping options and decided on UPS to get it there on the following Friday afternoon. They charged me $12.80 for the minimum five pounds plus $2.00 for the box. Both the other shipping options were within a dollar or so. (If I’d shipped it myself via Priority Mail using one of the Post Office’s free Flat Rate boxes, It would’ve cost around $5.00 to ship.)

The finished tools came back Thursday a week later. They are all sharpened perfectly as nearly as I can tell so far. I used one of the router bits all day yesterday routing the window openings for a new house and it performed very well.

The charge for sharpening the saw was $22.00 for 60 teeth and the return shipping was $12.00. Total cost for shipping everything and sharpening the blade was $47.00. The router bits were additional cost. Was it worth it?

saw blade.jpg
The actual sharpening cost is right in line with other services I have checked. Of course I could take my blades to a local guy working out of his backyard (no offense here people) but two problems come to mind. If I pay $135 for a top of the line Forrest blade, I darn well am not going to take it to “Ralph’s Pretty Good Saw Shop” and take a chance on getting it completely messed up. Plus if a tooth needs to be replaced, I don’t think I want Ralph doing it for me. One definition of a bullet is a carbide tip coming off a table saw blade.

The shipping is what adds to the cost. There happen to be two professional sharpening firms within about forty minutes of my house. If I deliver my blades to one of them, it will cost me four one way trips plus the time. On the other hand, my time is pretty cheap these days.

I conclude that even in an urban area with professional shops fairly close, if I need high end blades sharpened, I will accumulate as many as I can and ship them all together to save on shipping costs. (And if you send them at least five carbide sawblades to sharpen at one time, the return shipping is free.) I think the service is well worth it under that circumstance. On the other hand, if all I have is one $35 blade, then I’ll probably let Ralph do it.

More about Highland’s Mail-In Sharpening Service

  3 Responses to “Highland’s Mail-In Saw Sharpening Service”

  1. I really liked the saw sharpening service. I googled the address so that I could see where it was located, and it was a UPS store in New Jersey. I had my doubts, so I called them and a guy with a good ol’ new New Jersey accent answered. I asked him if he sent them out of the country or something, but he said no, that he did them right around the corner from the UPS location. They use that in case they are not there when UPS arrives.
    Anyway, I got the blade back in less than one week, and it cuts like butter. It’s really clean too. they put it to soak in an ultrasonic bath. Price was competitive with other places here in Atlanta that would have taken longer to do. When I do it again, I will do everything rather than just one blade. They give really good quantity discounts and pay for shipping if you do it right.

  2. This entry reminds me of when I was a boy growing up in Georgia. My pappy used to say “When life give you lemons, make lemonade”. But he was a hopeless alcoholic who never made much sense so I never paid much attention to him. Have a great day!

  3. Please keep up this marvelous work, it must take a long time to write such an informative post so you deserve congratulations on your work.

Sorry, the comment form is closed at this time.